slatex 2000 is a bituminised roofing felt, faced over half its width with a heat-laminated layer of aluminium foil.
Reflective Waterproofing Membrane under Slate Roofs.
Waterproofing layer laid under slate roofing tiles.
- Long lasting.
- Prevent ingress of dust.
- Waterproofs.
Bonding / Priming
No priming required.
Application
Starting at the lowest point of the slope, roll slatex 2000 out across the roof parallel to the eaves. The aluminium foil strip must face upward on the lower half of the slatex. The slatex 2000 is then nailed, with large headed copper clout nails, through the unprotected felt, onto a batten. In aggressive coastal environments it is safer to use Muntz metal (63 copper, 36 zinc, 1 tin) clout nails if available. After slating over the aluminium area the next strip of slatex 2000 is applied in similar fashion so that the aluminium foil coated area of the second sheet overlaps the uncoated strip of the first sheet.
Work proceeds up the slope of the roof until the entire area has been slated. End laps in the felt must be overlapped by a minimum of 150mm.
Packaging
slatex 2000 is supplied in rolls of 20 m x 450mm.
Handling & Storage
This product has a shelf life of 24 months if kept in a dry cool place in the original packaging. In more extreme conditions this period might be shortened.
Important Note
This data sheet is issued as a guide to the use of the product(s) concerned. Whilst a.b.e.® Construction Chemicals endeavours to ensure that any advice, recommendation, specification or information is accurate and correct, the company cannot – because a.b.e.® Construction Chemicals has no direct or continuous control over where and how a.b.e.® Construction Chemicals’ products are applied – accept any liability either directly or indirectly arising from the use of a.b.e.® Construction Chemicals’ products, whether or not in accordance with any advice, specification, recommendation or information given by the company.